 |
| |
|
|
1-USB2.0-Port 10/100Mbps Fast Ethernet Print Server |
| Introduction |
InfoSmart introduces INPS100UC(Z) ,It is a stand-alone device which provides the easier way to share printing work on the Ethernet Network .
This print server is compatible with USB printers from Canon,HP. Lexmark,Epson,, Samsung, Brother, Avision and other brands.
It is compatible with computer running Windows 2000 / XP / 2003 / NT4.0 / Me / 98SE / 98 / 95 / Mac OS 8.1 or higher / UNIX / Linux NetWare ( Bis ndery/NDS) operation systems
The INPS100UC(Z) has two user-friendly management interface ,Web interface and Windows-based setup Program in order to help administrator to set up Print Server management .
.jpg)
|
| INTERFACES |
| USB*: |
1 USB 2.0 (high speed)-compliant port, supporting 1.5Mbps (low speed), 12Mbps (full speed) and 480Mbps (high speed) data transmission rate. This port automatically detects the make and model of the USB printer. |
| * This product does not support use of USB hubs for daisy-chained connection, USB-to-Parallel connectors, or USB cable extenders. |
| LAN: |
Compliant with IEEE 802.3/803.2u standard, 10/100Mbps auto-sensing, RJ-45 (UTP)connector |
|
| KEY SOFTWARE SPECIFICATION |
| Easy-to-use Setup Wizard |
Yes (Windows Setup CD-ROM) |
| Network Operating SystemSupport |
Windows 95/98/98SE/Me, Windows NT 4.0/2000/XP, Mac OS 8.1 or higher, UNIX/Linux, NetWare (Bindery/NDS) |
| Network Protocol Support |
TCP/IP, IPX, NetBEUI, AppleTalk, LPR, SMB over IP |
| Internet Printing Protocol(IPP) Support |
Yes |
| Windows Print MonitorTechnology |
Yes |
| DHCP (client) Support |
Yes |
| Default IP Address |
192.168.0.10 |
| Management |
1. Web interface
2. Windows-based Setup Program |
| Software Upgradeable |
1. Web interface
2. Windows-based Setup Program
3. TFTP |
| SNMP & HP Web JetAdmin Support |
Yes |
| Email Alert |
Yes |
|
| HARDWARE SPECIFICATION |
| CPU |
RDC2886 @133MHz |
| Flash |
1Mbytes |
| System Memory |
2Mbytes SDRAM |
| Parallel Port |
None |
| LAN Port |
10/100Mbps, auto-sensing |
| USB Port |
USB 2.0 (high speed) standard compliant host controller |
| Reset Button |
Yes (Reset / Load Factory Defaults / Print Test Page) |
|
OTHERS |
| Power Supply |
3.3V, 2A |
| Dimension |
73.16(Length) x 64.75(Width) x 28.39(Height) mm |
| Weight |
56g (device only) |
| EMI Certifications |
CE, FCC Class B |
| Temperature |
Operating： 0 ~ 50℃ |
| Storage：-5 ~ 65 ℃ |
| Humidity |
Operating：0 ~ 70% |
| Storage：0 ~ 80% |
|
Specifications of LED Lights
|
| LED Light |
Position |
Type |
Color |
Specification |
| Power/Status |
Back Panel |
DIP |
Single, Orange |
A. When powered on, it flashes for the P.O.S.T. |
| B. When in Upgrade Mode, it flashes slowly. |
| C. When being upgraded, it flashes quickly. |
| D. When printing, it flashes quickly. |
| USB Link |
Back Panel |
DIP |
Bi-ColorUSB1.1: OrangeUSB2.0: Green |
A. When connect to USB 1.1 Printer, will light orange color. |
| B. When connect to USB 2.0 Printer, will light green color. |
| LAN Link |
RJ-45 Connector |
|
Dual10Mbps: Yellow100Mpbs: Green |
A. When the cable (network connectivity) is OK, it goes on. |
| B. If the cable (network connectivity) is NOT OK, it goes off. |
| C. When data is in transmission (Tx/Rx), it flashes quickly. |
|
※ Products and specifications are subject to the change without notice ※ |
 |
|
-01.jpg)
-02.jpg)
-03.jpg)
