 |
|
|
85Mbps HomePlug 1.0 Turbo to Fast Ethernet Adapter |
| Introduction |
Without adding any new wires, Powerline is to using existing electrical power lines to build a secure high speed networks in our homes and offices .
It's very easy to set up and use, so, you can do the installation by yourself ,no need ISP or system company.
Powerline uses existing electrical wiring to move data as fast as 85 or 200 Megabits per second (Mbps) ,just plug and play installation ,just plug the powerline adapter into the wall and connect the your Ethernet .
To connect to the Internet ,you need cable /DSL line or modem ,if you need to share connection among computers ,you need router. With the explosion of the Internet and broadband technology, power lines present a cost-effective, easy-to-adopt with your existing Ethernet home networking.
|
| Key Features |
- HomePlug 1.0 Turbo
- HomePlug data rate up to 85Mbps on existing AC power line with auto adaptation
- Supports one 10/100Mbps Auto-MDI/MDIX Ethernet RJ-45 port
- Supports 56-bit DES Protection for Secure Data Transmission
- Supports 3 LED indicators for Power, HomePlug and Ethernet
- Supports Windows based configuration utility
- Designed with universal power rating
|
| Specification |
| Standard |
HomePlug 1.0 Turbo |
| IEEE 802.3 10BASE-T / IEEE 802.3u 100BASE-TX |
| Network Media |
10BASE-T : Cat. 3,4,5, EIA/TIA-568 100-ohm screened twisted-pair |
100BASE-TX : Cat. 5, EIA/TIA-568 100-ohm screened twisted-pair |
| HomePlug Link speed |
Up to 85Mbps (auto adaptation) |
| Frequency band |
4.5MHz ~ 21MHz |
| Modulation Schemes |
OFDM |
| QAM 16/ 64/ 256/ 1024 |
| DBPSK |
| ROBO |
| Network Protocol |
IP Traffic |
| TELNET |
| FTP |
| Media Access Protocol |
CSMA/CA (HomePlug) |
| CSMA/CD (Ethernet) |
| Software Supported |
Windows 98SE |
| Windows 2000 |
| Windows ME |
| Windows XP |
| Security |
56-bit Data Encryption with Key Management |
| Range Coverage |
Up 300 meters (depends on environment) |
| Power |
100~230VAC, 160ma, Universal |
| Continuous Current Consumption |
2.5 watts. (max.) |
| Diagnostic LEDs |
Power |
| Power Link/ACT |
| Ethernet Link/ACT |
| Dimensions (W x H x D) |
99.9 x 65.5 x42mm (without plug) |
| Temperature |
Operation：0 ~ +40 oC |
| Storage：-25 ~ +55 oC |
| Humidity |
Operation：10% ~ 90% RH, no condensation |
| Emission |
FCC Class B |
| CE mark Class B |
| Safety |
UL |
| CB |
|
※ Products and specifications are subject to the change without notice ※ |
 |
|
