The INGS24G2G is an L2 managed Gigabit switch that supports SNMP, Web UI and CLI management interface. It is equipped with 24 Gigabit TP ports and 2 of which are dual media ports that accommodate optional 10/100/1000Base-T or SFP modules. In addition, the switchimplements the QoS (Quality of Service), Mac Filtering Policy, Port Mirror, VLAN and full L2 protocol. It is suitable for workgroups or WAN edge application.

2 dual media ports for flexible fiber connection

Port 23, 24 dual media ports are provided for flexible fiber connection. You can select to install optional SFP transceiver modules in these cages for short, medium or long distance fiber backbone attachment. Use of the SFP will disable their corresponding built-in 10/100/1000Base-T connections.

QoS supports layer 4 classification

The switch supports not only Layer 2 802.1p Priority Queue control, but also supports programmable higher layer classification and prioritization to enable enhanced Quality of Service (QoS) support for real time applications based oninformation taken from Layer 2 to Layer 4, such as VoIP.

Port Mirroring helps supervisor monitoring network

Port mirroring copies traffic from a specific port to a target port. This mechanism helps track network errors or abnormal packet transmission without interrupting the flow of data.

Q-in-Q VLAN for performance & security

The VLAN feature in the switch offers the benefits of both security and performance. VLAN is used to isolate traffic between different users and thus provides better security. Limiting the broadcast traffic to within the sameVLAN broadcast domain also enhances performance. Q-in-Q, the use of double VLAN tags is an efficient method for enabling Subscriber Aggregation. This is very useful in the MAN.

802.3ad Port Trunk for bandwidth aggregation

The Gigabit ports can be combined together to create a multi-link load-sharingtrunk. Up to 12 Gigabit ports can be set up per trunk for bandwidth up to 24Gbps, all traffic is aggregated based on MAC addresses, thus balancing the traffic load. The switch supports up to 8 trunking groups. Port trunks are useful for switch-to-switch cascading, providing very high full-duplex speeds.

802.1x Access Control improves network security

802.1x features enable user authentication for each network access attempt. Port security features allow you to limit the number of MAC addresses per portin order to control the number of stations for each port. Static MAC addresses can be defined for each port to ensure only registered machines are allowed toaccess. By enabling both of these features, you can establish an access mechanism based on user and machine identities, as well as control the number of access stations.

802.1D compatible & 802.1w rapid spanning tree

For mission critical environments with multiple switches supporting STP, you can configure the switches with a redundant backup bridge path, so transmission and reception of packets can be guaranteed in event of any switch failed on the network.

LED Description

Diagnostic LED:

Network Interface

Cable and Maximum Length

Hardware Spec.