 |
|
|
| Wireless 2.4GHz Multi-Function Radio |
| Introduction |
The INAP2202 is a 2.4GHz 802.11b/g High Power 200mW Wireless Outdoor Radio which is designed to withstand harsh outdoor environments. Base on 2.4GHz IEEE 802.11b/g Wireless standard, it is very easy to setup and implement for outdoor application. The Multi function for wireless mode like PtP, PtMP, AP and AP Client mode, can suit to lots demands for wireless lastmile environment. The cost-effictive benefit is the best way for WISP, SI to implement the wireless application. The high wireless security for WEP, WPA, WPA2, 802.1x, MAC access control, disable broadcast the SSID can protect the wireless link reliable and avoid the attack from harkers. For N-type connector design can suit to any type of high gain outdoor antennas for large metro area Hotzones.
The INAP2202 offers network scalability, extended wireless coverage, expansion in network capacity and ease of installation and management. The INAP2202 is the most ideal candidate for Service Providers looking to deliver carrier class wireless services to multiple market segments such as campuses, hospitality, healthcare, warehousing and wider metropolitan area deployments.By the way, it very suitable to Hot Spot application.
|
| Key Features |
Compliant with IEEE 802.11b/g wireless standards.
Compliant with IEEE 802.3, 802.3u, 802.3af(PoE) standards.
Supports multiple wireless operating mode – AP/Bridge/AP+Bridge/AP Client.
Supports output power adjust functions, max output power can up to 200mW(23dbm)– INAP2202.
Supports QoS function to make sure the link quality for special application like voice stream.
Supports VLAN, max up to 8 VLANs.
Supports wireless link up to 12 miles(20km) for PtP application.
Supports data rates up to 108Mbps for wireless networks.
Supports Config Wizard for easy setup.
Support 64/128/152-bit WEP encryption, WPA, WPA2, 802.1x, and Radius for wireless security.
Supports SSID hidden mode, MAC address filter to ensure the trusted wireless client to link.
Integrated with PoE Splitter and injector for outdoor application.
Long range and high speed Wireless Connectivity.
Provide N-type Female connector for connect to high gain outdoor antenna.
Cost-effective wireless outdoor device for campus, enterprise, hotel or government application.
Provide water-proof housing.
|
| Specification |
| Wireless Connection |
‧ Support IEEE 802.11b/g AP/Bridge/AP+Bridge/ AP Client |
| ‧ Support 64/128/152-Bit WEP encryption, WPA-PSK, WPA2-PSK, 802.1x, Radius for wireless security |
| ‧ Supports Output Power adjustment function |
| ‧ Throughput max 35Mbps.(Support SuperG mode) |
| ‧ Output Power max. 23dbm(200mW) |
| ‧ Channel: US(11), EU(13), JP(14) |
| Standard |
‧ IEEE 802.3, 802.3u, 802.3af |
| ‧ IEEE 802.11b, 802.11g |
| Data Rates |
‧ IEEE 802.11b: 1, 2, 5.5 and 11 Mbps |
| ‧ IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54, 108 Mbps |
| Modulation |
‧ OFDM: BPSK, QPSK |
| ‧ DSSS: DBPSK, DQPSK, CCK, PBCC(11b) |
| Other Function |
‧ Static IP/DHCP Server and Client |
| ‧ VLAN, max 8 VLANs |
| ‧ QoS Supported |
| Device Interfaces and Accessory |
‧ 1 RJ45 LAN Port |
| ‧ 1 PoE injector (Accessories) |
| ‧ Mounting Kit |
| ‧ 1 N-type Female Connector |
| Management |
‧ Firmware upgrade via HTTP |
| ‧ SNMP |
| ‧ Password protected access |
| Power Requirements |
‧ Input : AC 100 – 264V, 50 -60Hz |
| ‧ Input via PoE Injector : DC 48V |
| Physical Description |
‧ Dimension : 320(L)x220(W)x65(H) mm |
| ‧ Mount : Plating Zinc Iron Plate |
| Operation Environment |
‧ Operating Temperature : -20 ~ 60 ℃ |
| ‧ Storage Temperature : -40 ~ 70 ℃ |
| ‧ Humidity : 5% ~ 95%, non-condensing |
|
※ Products and specifications are subject to the change without notice ※ |
 |
|
