Serial
Power Control Solution for Any Ac-powered devices, computers and servers
ioPower for Serial Power Control [Cascadable Unit]
ioPower can be used in
standalone/Cascaded configuration
The ioPower provides
8 AC power outlets and can be deployed alone with a host PC for
serial power control of any AC-powered devices. The ioPower proves
to be a reliable and convenient serial power control solution that
offers cost-effective power control solution to enterprise-level
customers.
ioPower
connected to a host PC
The ioPower is also capable of cascading with multiple downstream
units into a daisy-chain configuration to maximize the port capacity
up to hundred more. Thus you can easily control up to a hundred
of AC-powered devices and/or servers.
ioPower
as IP KVM Extender Accessory for Remote Power Control
When your servers or network devices just locked
up and stopped responding, it can only be salvaged by cycling power
off and on for a reboot. As simple as this reboot procedure can
be, it nevertheless requires the admin to attend the server room
just to switch the power off and on again. But what if the admin
is worlds away from the server room and yet has to respond to this
server lock up immediately? Well, an IP-based KVM Extender or IP
KVM Switch such as KLE or Prima IP KVM Switch, with a serial power
control unit, such as ioPower, might be the right and the only reliable
solution....
In this servers crisis management infrastructure, KLE or Prima IP
KVM switch offers an anytime anywhere access and control platform
to your remote servers, and ioPower is the indispensable power control
unit that enables the forced power on/off and power cycling capability
from authorized remote clients.
To enable the remote power management capability of your IP-based
KVM Switch Solution, you can connect ioPower with any IP KVM Extender
or IP KVM Swtich that is equpied with a serial power control interface,
which is capable of sending ASCII commands through serial connection.
ioPower works seamlessly with KLE's viewer interface to implement
a total power control of your server room anytime anywhere in the
world. The server admin no longer has to call the server room to
help switch off and on the sever power ever again.
ioPower in cascaded configuration
(here used as KLE accessory for Remote Power Control
|
| Hardware
¡E Can
be used alone or cascaded with multiple downstream units for power
control of 8 to 100 more AC-powered devices
¡E Connected with a host PC via serial interface (RS-232)
¡E Allows full control of 8 AC power outlets using ASCII commands
over a serial interface
¡E Cascadable up to 16 units [16 x ioPower] and control up to 128
AC power outlets, using UTP cables
¡E ver RJ-45 interfaces
¡E 19" rack-mountable design with metal case
¡E Numerical display to show power module bank number when in multiple
cascaded application
¡E Numerical display to monitor total current loads (showing 0.0
~ 15A)
¡E 8 green (ON/OFF) LED indicators to show the ON/OFF status of
each A/C power outlet
¡E 8 red (Alarm) LED indicators to show the state of failure of
each AC power outlet
¡E ¡§One-Touch" power ON/Off control by front-panel buttons
(with 5¡¨ time-delay for activation/deactivation)
¡E Firmware upgradable for functionality enhancement in the future
ioPower Management
Software (Only for use with ioPower)
¡E Intuitive user interface
with virtual front-panel, power buttons and LED indicators
¡E Current loads (per port/total) and bank number displays
¡E Auto-configuration of COM port
¡E Power On/Off Timer function
¡E Simultaneous Power on/off all ports of one/all banks
¡E Power On/Off confirmation dialog prompt
¡E Host PC scheduled shutdown
¡E Power activation/deactivation based on duration/specific time
point/daily-weekly recurrence
¡E timer settings
|
