 |
|
| 11G
Wireless LAN Series 54Mbps Wireless PCI Adapter
|
 |
| Features |
|
The Wireless PCI Adapter connects you with
Wireless networks at an incredible 54Mbps! And for added versatility,
it can also interoperate with all the 11Mbps Wireless-B (802.11b)
Products found in homes, businesses, and public wireless hotspots
around the country. And in either mode, your wireless communications
are protected by up to 128-bit encryption and the new industrial-strength
WPA (Wi-Fi Protected Access?) security, so your data is safe.
So don't hassle with running cables through your house¡Xget your
desktop connected the easy way with the Wireless PCI Adapter.
|
|
Specification
|
 |
IEEE
802.11g Section |
| Standard |
2.4GHz OFDM (IEEE
802.11g) |
| Radioand
Modulation Type |
BPSK, QPSK, 16QAM,
64QAM, OFDM |
| Operating
Frequency |
2400 ~ 2483.5MHz
ISM band |
| Channel
Numbers |
11 channels for
United States; 13 channels for Europe Countries ; 13 channels
for Japan |
| Data
Rate |
108,
54, 48, 36, 24, 18, 12, 9 and 6Mbp |
| Media
Access Protocol |
CSMA/CA with ACK |
| Transmitter
Output |
Typical RF Output
Power at each Data Rate |
| Power |
+10 ~ 14dBm at 54Mbps |
| +11 ~ 15dBm at 48Mbps |
| +13 ~ 15dBm at 36Mbps |
| +17 ~ 18dBm at 24,
18, 12, 9, and 6Mbps |
| Receiver
Sensitivity |
Typical Sensitivity
at Which Frame (1000-byte PDUs) Error Rate = 10% |
| ¡V87dBm at 6Mbps |
| ¡V86dBm at 9Mbps |
| ¡V85dBm at 12Mbps |
| ¡V83dBm at 18Mbps |
| ¡V80dBm at 24Mbps |
| ¡V76dBm at 36Mbps |
| ¡V71dBm at 48Mbps |
| ¡V66dBm at 54Mbps |
|
General
Section |
| External
Antenna |
Omni-directional
dipole antenna with 2dBi |
| Internal
Consumption |
Provides provision
for an Internal Antenna attach (opton) |
| Form
Factor and Interface |
PCI Local Bus 2.2
ComplianceLow-profile and half-length (PCI Raw Variable Height
Short Card)PCI 32-bit Interface |
|
Operating Voltage |
5VDC +/- 10% |
| LEDs |
POWER
LED, NETWORK LED |
|
Information |
| General
Information |
General
Information shows the name of Wireless Adapter, Adapter MAC
Address, Regulatory Domain, Firmware Version, and Utility Version. |
| Current
Link Information |
Current Link Information
shows the Current Setting ESSID, Channel Number, Associated
BSSID, Network Type (infrastructure or Ad-hoc network), WEP
Status (enable or disable), Link Status (Connect or Dis-connect),
802.11g Transmit Speed (6, 9, 12, 18, 24, 36, 48, 54, and 108Mbps),
802.11b Transmit Speed (1, 2, 5.5, 11Mbps), Signal Strength,
and Link Quality. |
|
Configuration |
| ESS
ID |
Input an SSID number
if the roaming feature is enabledSupports for ASCII printable
characters |
| Network
Type |
Ad-hoc Mode and
802.11 Ad-hoc Mode for network configurations that do not have
any access points |
| Infrastructure Mode
for network configurations with access points |
| Power
Save |
Extend the battery
life of clients by allowing the client to sleep for short periods
of time while the Access Point buffers the messages |
| Transmission
Speed |
This indicates the
communication rates. Select appropriate transmission speed to
match your wireless LAN settings |
| Roaming |
Support
Automatic or Manual Rescan to associate with access point |
|
Encryption |
| Encryption |
RC4
encryption algorithm |
| Supports
64-bit, 128-bit, and 152-bit WEP encryption |
| Support
open system (OSA) and shared key authentication (SKA) |
|
Mechanical Requirements |
| Length
* Width * Height 6.6 inches *4.2 inches * 5.0mm |
|
| |
