INS1600F


¡@This switch is a stand-alone 16 ports 10/100Mbps switch designed for low cost high performance solutions. This switch offers full wire-speed switching on all 16 ports, self-learning of up to 16K MAC addresses, highly optimized flow control for full and half duplex, evolved traffic priority services. All ports are full and half duplex capable. Each port has its dedicated receive and transmit FIFO¡¦s with necessary logic to implement flow-control for both duplex modes. This switch utilizes PAUSE frames as defined in IEEE 802.3x for full duplex flow control, and executes backpressure for half duplex mode. No packet will be lost when flow control is operational. This switch provides leading edge QoS with three levels of priority. This feature allows effective video switching in multimedia applications and improved support for voice over packet applications.

¡@This switch handles a 16K MAC address-lookup table with searching, self-learning, automatic aging, at a very high speed. Forwarding rules are implemented according with IEEE 802.1d specifications. This switch also provides filtering capability for bad packets, only good CRC and valid sized packets will be forwarded.

KEY FEATURES


¡D 1Mbytes packet buffer

¡D Up to 16K MAC addresses table /hashing algorithm on address learning.

¡D Three QoS levels checked via IP Header

¡D Maximum throughput

¡D Broadcast throttling

¡D Supports store & forward architecture and performs forwarding and filtering at non-blocking full wire speed.

¡D Buffer allocation with 512bytes each.

¡D Supports aging function and 802.3x now control for full duplex and backpressure function for half/duplex operation.

¡D Supports Flow Control. Supports broadcast storm filter.

¡D Support console port to configuration the switch.

¡D Support two Trunk Group; each group support four trunking port.

¡D Supports one build-in fiber optical port shared with port 16.

¡D LED Indicators: System-power and collision LED Individual port-link/activity and speed LEDs

¡D Dimension: 148 mm (W) x 250 mm (L) x 43 mm (H)

¡D Input Power Requirement: 100~240VAC, 50~60HZ

¡D Registrations: FCC , CE, C-Tick

 
SPECIFICATION

Standard: IEEE802.3/ IEEE802.3u
Network Media: 100 Base-TX UTP/SIP category 5 cable 10 Base-T-UTP/STP category 3,4 or 5 cable
Connectors: 16 RJ-45 ports for 10/100Mbps. One Port SC 100BaseFX
LED Indicators: System-power and collision LED Individual port-link/activity and speed LEDs
Dimension: 148mm(W) x 250mm(L) x 43mm(H)
Temperature: Operating- 0¢J to 50¢J Storage- -20¢J to 70¢J
Humidity: Operating- 10% to 90% RH Storage- 5% to 90% RH Input Power Requirement: 100~240VAC, 50~60HZ
Registrations: FCC Part 15, CE, C-Tick

 
Copyright (c) 2004 INFOSMART Technology Co.,Ltd. All right reserved. sales@infosmart.com.tw