¡@Aiming to small workgroups and SOHO, the Compact Ethernet Hub series
deliver a standard-based, Plug-and-Play networking solution.
¡@The series provide eight RJ-45 Modular Jacks and one BNC for the
connection to 10Mbps network.
¡@An uplink port is supported. With this port, the hub can be cascaded
with adjacent hubs to expand port count and connect additional users.
¡@Featuring compact design, low cost, and easy installation, the series
represent an extraordinary value for users who are seeking for the
most straight-forward and guaranteed connectivity solution.
KEY
FEATURES
¡D8xTP
ports Ethernet Hub
¡DPlastic
case
¡DConforms
to IEEE802.3 Repeater specification and 10Base-T standard.
¡DProvide
LED indicators for monitoring overall Hub condition and individual
port working status.
¡DAutomatic
bad port partitioning to protect the network.
¡DFor
desktop installation.
¡DCompact
Palm-sized case design.
¡DPlug
and Play design, it requires no software configuration in installation.
SPECIFICATION
Transmission
technique:
Base
band
Topology:
Tree (backbone and star)
Access
method:
(CSMA/CD)
Transmission
rate:
10Mbps
Media support:
Shield/ unshield twisted-pair wire
Connector
support:
Shielded
RJ-45 connectors.
LED:
Green
Power LED ¡§ PWR ¡§
Green Link/Active LED indicators for TP ports (lit when the
port is connected to a node and blinks rapidly when data is
in transmission.)
Amber Collision LED ¡§ COL ¡§ (it blinks to show collision happening
in transmission.)
Daisy Chain setting switch:
The
final port can be converted to a Daisy Chain port by setting
the slide switch. To slide to X side is to defined the port
to be an Up-link port. To slide to the parallel lines side is
to define this port to be a normal port.
DC-power
socket:
The
end of specified AC-adapter should be plugged into this socked.
Copyright
(c) 2004 INFOSMART Technology Co.,Ltd.
All right reserved.
