 |
|
8-Port
10/100/1000Mbps NWay Switch |
This
device is a powerful and high-performance 10/100/1000Mbps Gigabit
Ethernet switch with
8 * 10/100/1000Mbps Gigabit Ethernet ports. Moreover, it provides
a backbone link to your switched workgroup or a server fat-pipe link.
With such flexible architecture, users can easily plan the network
without bandwidth and media limitation.
With 16Gbps switch bandwidth, the switch is fully
non-blocking architecture can support every switching port wire-speed
performance. Compared to the shared 10/100/1000Mbps networks, the
switch delivers a dedicated 10/100/1000Mbps connection to every attached
client with no bandwidth congestion issue. Store-and-forward switching
mode promises the low latency plus eliminates all the network errors,
including runt and CRC error packets.
The switch provides half and full-duplex capability on all ports to
boost bandwidth for servers and power users and is fully compliant
with all kinds of network protocols. Moreover, the rich diagnostic
LEDs on the front-panel provides the operating status of individual
port and whole system.
|
 |
| KEY
FEATURES |
|
ĄDComplies with 10BASE-T specifications of the IEEE802.3 standard
ĄD Complies with 100BASE-TX specifications of the IEEE802.3u standard
ĄD Complies with 1000BASE-T specifications of the IEEE802.3ab standard
ĄD8 * 10/100/1000Mbps RJ-45 Nway ports
ĄDSupports NWay protocol for speed (10/100/1000Mbps) and duplex
mode (Half/Full) auto-detection
ĄD Supports MDI/MDI-X auto crossover
ĄD Supports full and half duplex operation on all ports
ĄD Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
ĄD Wire-speed packet filtering and forwarding rate
ĄD Store-and-forward architecture filters fragment & CRC error
packets
ĄD Supports 4K MAC address entries in whole system
ĄD128KBytes buffer memory
ĄD Supports Jumbo frame 9K/12K
ĄD Supports extensive LED indicators for network diagnostics
ĄD External power adapter
ĄD FCC Class A, CE
|
| SPECIFICATION |
| Standard
|
IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3x standards |
| Interface |
8 * 10/100/1000Mbps RJ-45 switching ports |
| NWay Protocol Support |
10Mbps: Full/Half duplex |
| 100Mbps: Full/Half duplex |
| 1000Mbps: Full duplex only |
| Emission |
FCC Class A, CE |
| Rich LED indicators |
System: Power |
| Port: 1000M; 100M; LINK/ACT |
| Operating Temperature |
00- 500C (320- 1220F) |
| Operating Humidity |
10% ~ 90% (non-condensing) |
| Power Supply |
External power adapter 12VDC 1.2A/1.25A |
|
|
|
