Infosmart-IN320

IN320

The special feature of this product is that it has a RJ-45 connector on CardBus card, thus eliminate the necessity of a dongle ( Dongle-Less). This product is a high speed CardBus Ethernet PC Card. It uses REALTEK 8139C(L) 3.3V single chip 10/100 Mbps Ethernet IC. The card supports 10Mbps and 100Mbps dual speed and automatic speed detection and connection. With its 32-bit high speed bus, this card provides high bandwidth networking capability to notebook PCs.

KEY FEATURES

． PC Card standard 68-pin 32-bit Card Bus Interface

．RJ-45 connector on CardBus card, no need of a dongle

．5.0mm Type II Credit Card size

．Complies with IEEE 802.3 10Base-T and 802.3u 100Base-TX

．10/100Mbps auto-sensing capability

．Full/Half-duplex auto-negotiation supported for both 10Base-T and 100Base-TX

．"Hot swap" card insertion and removal

．3.3V low power consumption

．Support all popular Network Operating Systems

．Diagnostics LED indicators LNK, 100M, Act

．Switchless design and software-configurable card setting

．Low power consumption

．Support Windows 95,98,NT and Windows 2000,ME/XP, Mac OS, Linux

SPECIFICATION

Interface:	68 pin connector for attachment to PC's PCMCIA/CardBus slot
LAN Interface:	RJ-45 female connector on board for network interface
PC Card standard:	Credit-card size, type II, no need of a dongle (dongle-less)Complies with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX standard
Speed Sense and Support:	Nway Automatically negotiates 10 or 100Mbps connection rate, Full duplex or Half duplex.
Cable requirement:	10Base-T: CAT3 / CAT5 UTP up to 100M/328ft
Cable requirement:	100Base-TX: CAT5 UTP up to 100M/328ft
Dimension:	110 x 54 x 12.5 mm (L x W x H)
Certification:	FCC class B, CE(CISPR22 class B), VCCI Class 2
Environmental Operating Ranges	Operating : Temperature : 0 ~ 55°C Humidity: 10 ~ 90%
Environmental Operating Ranges	Storage: Temperature :- 20 ~ 90°C Humidity: 10 ~ 90%
Power Consumption:	Operational average: 93.4 mA / 3.3V
LED Indication:	"10" LEDndicates 10Mbps Ethernet is connected
	"100" LED: indicates 100Mbps Ethernet is connected
	"ACT" LED: indicates 10M or 100Mbps Ethernet is in active now.
Drivers support:	Windows95/ 98/ ME/NT4.0/ 2000/XP; Novell ODI; Mac OS; Linux; Packet Driver

sales@infosmart.com.tw