 |
IN100
IN100WL
|
The IN100/IN100WL is a highly integrated
and cost-effective single-chip Fast Ethernet card that provides 32-bit
performance, PCI bus master capability, and full compliance with IEEE
802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control.
It also supports Advanced Configuration Power management Interface
(ACPI), PCI power management for modern operating systems that is
capable of Operating System Directed Power Management (OSPM) to achieve
the most efficient power management.
Besides the ACPI feature, the IN100/IN100WL also
supports remote wake-up (including AMD Magic Packet*, LinkChg, and
Microsoft R wake-up frame) in both ACPI and APM environments. Especially,
the IN100/IN100WL is capable of performing internal reset whenever
there is (auxiliary) power applied to.
The IN100/IN100WL keeps network maintenance cost low and eliminates
usage barriers. It is the easiest way to upgrade a network from 10
to 100Mbps. It also supports full-duplex operation, making possible
200Mbps of bandwidth at no additional cost.
It includes an interface for a boot ROM and can
be used in diskless workstations, providing maximum network security
and ease of management.
|
|
| KEY
FEATURES |
¡DIntegrated Fast Ethernet MAC, Physical chip and transceiver in one
chip
¡D10 Mb/s and 100 Mb/s operation
¡DSupports 10 Mb/s and 100 Mb/s N-way Auto-negotiation operation
¡DPCI local bus single-chip Fast Ethernet controller
¡DCompliant to PCI Revision 2.2
¡DSupports PCI clock 16.75MHz-40MHz
¡DSupports PCI target fast back-to-back transaction
¡DSupports ACPI, PCI power management
¡DSupports up to 128K bytes Boot ROM interface for EPROM
¡DCompliant to PC99 standard
¡DSupports Wake-On-LAN function and remote wake-up (Magic Packet*,
LinkChg and Microsoft R wake-up frame)(Optional)
¡DSupports 4 Wake-On-LAN (WOL) signals (active high, active low, positive
pulse, and negative pulse)(Optional)
¡DIncludes a programmable, PCI burst size and early tx/rx threshold.
¡DContains two large (2Kbyte) independent receive and transmit FIFO¡¦
s
¡DAdvanced power saving mode when LAN function or wakeup function
is not used
¡DHalf/Full duplex capability
¡DSupports Full Duplex Flow Control (IEEE 802.3x)
¡D3.3V power supply with 5V tolerant I/Os.
|
| SPECIFICATION |
| Access
Method: |
CSMA/CD |
| Network
Interface: |
IEEE 802.3 10Base-T IEEE 802.3u 100Base-Tx |
| Cable:
|
10Base-T:Category 3,4 or 5 UTP/STP cable |
| 100Base-T:Category
5 UTP/STP cable |
| Date
Rate: |
10Mbps/20Mbps(Full-duplex) |
| 100Mbps/200Mbps
(Full-duplex) |
| Transmit/Receive
Buffer Memory: |
2KB
transmit FIFO; 2KB receive FIFO |
| Driver
Support: |
Novell
Netware 3.12 / 4.x / 5.0; Client32; Microsoft Windows 95 / 98
/ NT / 2000/XP; Windows for Workgroups 3.11; SCO UnixWare 7.x;
SCO UNIX LLI/MDI Drivers; Packet driver; NDIS (OS/2 LAN server
& DOS LAN); NDIS3 (Windows 95, OSR2, Windows NT 3.51 and
Windows NT 4.0 NDIS 3.1) |
| Power
Input: |
+3.3 Volts at 330 mA. maximum |
| Temperature:
|
0¢XC~45¢XC (Operating);-40¢XC~70¢XC(Storage) |
| Humidity:
|
20%-90%
relative Humidity |
| EMI/EMC:
|
FCC
Class B, CE |
|
|
|
